1251 visits【description】 Eccentric Different Reducer Pipe Is A Type Of Pipe Fitting Used For Pipe Diameter Changes. The Commonly Used Forming Process Is Reduced Diameter Pressing, Expanded Diameter Pressing, Or A Combination Of Reduced Diameter And Expanded Diameter Pressing. For Certain Specifications Of Reducers, Stamping Forming Can Also Be Used. In Addition To Using Steel Pipes As Raw Materials To Produce Eccentric Reducers, Some Specifications Of Reducers Can Also Be Produced Using Steel Plates Through Stamping For
Eccentric Different Reducer Pipe Is A Type Of Pipe Fitting Used For Pipe Diameter Changes. The Commonly Used Forming Process Is Reduced Diameter Pressing, Expanded Diameter Pressing, Or A Combination Of Reduced Diameter And Expanded Diameter Pressing. For Certain Specifications Of Reducers, Stamping Forming Can Also Be Used.
In Addition To Using Steel Pipes As Raw Materials To Produce Eccentric Reducers, Some Specifications Of Reducers Can Also Be Produced Using Steel Plates Through Stamping Forming Technology. The Shape Of The Die Used For Stretching Is Designed Based On The Inner Surface Dimensions Of The Reducer, And The Steel Plate After Cutting Is Stamped And Stretched Into Shape Using The Die.
Structural Characteristics
The Material Of The Eccentric Reducer Is Carbon Steel, Which Is Represented By Multiplying The Diameter Of The Large Head By The Diameter Of The Small Head By The Thickness.
Eccentric Reducer Standard: National Standard, American Standard, British Standard, And Various Non-standard High-pressure Stamping.
The Shrinkage Forming Process Of Eccentric Reducing Pipes Is To Place A Billet With The Same Diameter As The Large End Of The Reducing Pipe Into A Forming Mold, And Press It Along The Axial Direction Of The Billet To Make The Metal Move Along The Mold Cavity And Shrink Into Shape. According To The Size Of The Diameter Change Of The Reducer, It Can Be Divided Into One-time Compression Forming Or Multiple Compression Forming.
The Characteristics Of Eccentric Reducing Pipes Are Significantly Higher Strength Than Carbon Steel With The Same Carbon Content, Good Toughness And Plasticity, As Well As Good Weldability And Corrosion Resistance.
Application
1. When There Is A Change In The Flow Rate Of The Fluid In The Pipeline, Such As An Increase Or Decrease, And The Flow Velocity Requirement Does Not Change Significantly, A Reducer Should Be Used.
2. To Prevent Cavitation At The Inlet Of The Pump, A Reducing Pipe Is Required.
3. In Order To Match With The Joints Of Instruments Such As Flow Meters And Regulating Valves, Reducing Pipes Are Also Required.
